扭剪扳手扭剪型電動扳手扭剪槍的特點及使用扭剪型電動扳手是扭剪型螺栓擰緊作業的必備工具。當扳手達到一定扭矩時，即可從螺栓的V型切口處剪斷螺栓梅花頭部分，完成螺栓擰緊作業，廣泛應用于鋼結構橋梁、廠房、發電設備等設施的施工作業。
Torsional shear wrench torsional shear electric wrench characteristics of torsional shear gun and the use of torsional shear electric wrench is a necessary tool for torsional shear bolt tightening operation. When the wrench reaches a certain torque, the plum blossom head of the bolt can be cut from the V-notch of the bolt to complete the bolt tightening operation. It is widely used in the construction of steel structure bridges, plants, power generation equipment and other facilities.
特點：
characteristic:
1.高速馬達、低噪音、大功率、額定電壓220V；
1. High speed motor, low noise, high power, rated voltage 220V;
2.散熱性好、耐撞擊強、堅固可靠；
2. Good heat dissipation, strong impact resistance, firm and reliable;
3.槍式握把、負荷人體工學、增加握持力、減輕疲勞強度；
3. Gun grip, load ergonomics, increase grip force and reduce fatigue strength;
4.精密行星減速、功效提高、運行平穩；應用：扭剪型高強螺栓的初緊可使用沖擊電動扳手或定扭矩扳手,而終緊必須使用扭剪扳手，所以扭剪扳手是專門終緊扭剪型高強螺栓的。
4. Precision planetary deceleration, improved efficiency and stable operation; Application: impact electric wrench or constant torque wrench can be used for the initial tightening of torsional shear high-strength bolts, while the torsional shear wrench must be used for the final tightening, so the torsional shear wrench is specially used for the final tightening of torsional shear high-strength bolts.
使用：本產品主要用于終緊扭剪型高強螺栓，它的目的就是把扭剪型高強螺栓的梅花頭打斷即可。工作時將扳手頭對準螺栓頭，扣動開關即可開始工作，幾秒后，螺栓梅花頭將被扭斷，然后抽出扳手扣動扳機將梅花頭彈出，即結束工作。
Usage: This product is mainly used for final tightening of torsional shear high-strength bolts. Its purpose is to break the plum blossom head of torsional shear high-strength bolts. When working, align the wrench head with the bolt head, and then pull the switch to start working. After a few seconds, the bolt Torx head will be broken, and then pull out the wrench to pull the trigger to eject the Torx head, which is the end of the work.
以上就是
扭剪扳手為大家介紹的內容，感謝您在百忙之中查看我公司的信息內容，如果您想要了解的更多，歡迎您來電進行咨詢!
http://xlf88.cnThe above is the content of the price of torsion shear wrench. Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation! http://xlf88.cn
